EP 1110-1-28
31 Aug 01
Table B-3
Analytical Data Acceptance Criteria for
Lead-Based Paint Hazard Control Activities
ACCEPTANCE LIMITS
DATA ATTRIBUTE
SINGLE WIPE
COMPOSITE WIPE
PAINT CHIP
SOIL
Within 10% of Known Value
Within 10% of Known Value
Within 10% of Known Value
INDEPENDANT
CALIBRATION
Within 10% of Known Value
VERIFICATION (ICV)
Once per Day
INITIAL CALIBRATION BLANK (ICB)
Absolute Value Not More Than
Absolute Value Not More Than
Absolute Value Not More Than
Absolute Value Not More Than
10% of the Regulatory Limit or
10% of the Regulatory Limit or
10% of the Regulatory Limit or
10% of the Regulatory Limit or
Minimum Level of Concern
Minimum Level of Concern
Minimum Level of Concern
Minimum Level of Concern
At the Beginning of Run
Within 15% of Known Value
Within 15% of Known Value
Within 15% of Known Value
Within 15% of Known Value
CONTINUING
CALIBRATION
for ICP or FAAS; Within 20%
for ICP or FAAS; Within 20%
for ICP or FAAS; Within 20%
for ICP or FAAS; Within 20%
VERIFICATION CCV)
for GFAA
for GFAA
for GFAA
for GFAA
Beginning and End of Run and Every 10
Samples or as specified in the SOP
INTERFERENCE CHECK SAMPLE (ICS)
Within 20% of Known Value
Within 20% of Known Value
Within 20% of Known Value
Within 20% of Known Value
Beginning and End of Run or Twice Every
Eight Hours
CONTINUING CALIBRATION BLANK
Absolute Value not More Than
Absolute Value not More Than
Absolute Value not More Than
Absolute Value not More Than
(CCB)
10% of Regulatory Limit of
10% of Regulatory Limit of
10% of Regulatory Limit of
10% of Regulatory Limit of
Level of Concern
Level of Concern
Level of Concern
Level of Concern
After each ICS and CCV
B-7
Previous Page
