EP 1110-1-28
31 Aug 01
b. E1613, Standard Test Method for Analysis of Digested Samples for Lead by
Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic
Absorption (FAAS), or Graphite Furnace Atomic Absorption (GFAAS) Techniques
c. E1644, Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the
Determination of Lead by Atomic Spectrometry
d. E1645, Standard Practice for the Preparation of Dried Paint Samples for
Subsequent Lead Analysis by Atomic Spectrometry
e. E1726, Standard Practice for Sample Digestion of Soils for the Determination of
Lead by Atomic Spectrometry
f. E1727, Standard Practice for Field Collection of Soil Samples for Lead
Determination by Atomic Spectrometry Techniques
g. E1728, Standard Practice for Field Collection of Settled Dust Samples Using
Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
h. E1729, Standard Practice for Field Collection of Dried Paint Samples for Lead
Determination by Atomic Spectrometry Techniques
i.
E1792, Standard Specification for Wipe Sampling Materials for Lead in Surface
Dust
j. E1979, Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air
Samples for Subsequent Determination of Lead
1.2
REGULATORY REQUIREMENTS
1.2.1
Regulatory Authority/Requirements
The Contractor shall conduct all work in accordance with the following Federal, state, and local
regulations and requirements. Where inconsistencies exist between the requirements and this SOW, the
Contractor shall use the most protective.
1.2.1.1
Federal Requirements
a. Assessment Procedures and Requirements.
The Contractor shall comply with all 40 CFR 745 Subpart L requirements as outlined in this SOW,
using referenced methodologies of the Guidelines for the Evaluation and Control of Lead-Based Paint
Hazards in Housing, HUD, June 1995 (Chapter 7 Revision, 1997); and EPA "Lead; Identification of
Dangerous Levels of Lead"; Final Rule, 66 FR 1206, 5 January 2001. The Contractor shall comply
with DA Public Works Technical Bulletin 420-70-2, Installation Lead Hazard Management regarding
use of DA Hazardous Asbestos and Lead Optimal Management System (HALO) (See Glossary).
A-10
Previous Page
